Concept Guide

show ip probe
show ip probe
Description
This command displays the health-check profile settings for measuring WAN reachability and latency on a
branch controller uplink, and the default probe profile settings for policy-based routing using next-hop lists.
Syntax
No parameters
Usage Guidelines
The health-check feature uses ping or UDP probes for measuring WAN reachability and latency. Policy-based
routing uses ping probes to determine the reachability of devices on a next-hop list.
Examples
The following command displays the current IP probe settings for the default and health-check IP probe
profiles.
IP Probe Entries
----------------
Name Probe Mode Frequency(in sec) Retries Burst size
---- ---------- ----------------- ------- ----------
default Ping 10 19 3
health-check Ping 10 3 5
The output of this command contains the following information:
Column Description
Name Name of the ip probe profile, which is either default or health-check.
Probe Mode Indicates whether the probes are sent as ping or UDP packets.
Frequency
Probe interval, in seconds. The controller sends the number of probes in the Burst
Size column during each frequency interval.
retries Number of times the controller attempts to resend a probe.
burst-size Number of probes sent during the probe frequency interval that appears in the
Frequency column.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ip probe | 1615