Concept Guide

firewall cp-bandwidth-contract
firewall cp-bandwidth-contract {auth|route|sessmirr|trusted-mcast|trusted-ucast
|untrusted-mcast|untrusted-ucast} <Rate>
Description
This command configures bandwidth contract traffic rate limits, in packets per second, to prevent denial of
service attacks.
Syntax
Parameter Description Range Default
auth
Specifies the traffic rate limit that is forwarded to the
authentication process.
1-65535
pps
976 pps
route
Specifies the traffic rate limit that needs ARP
requests.
1-65535
pps
976 pps
sessmirr
Specifies the session mirrored traffic forwarded to
the controller.
1-65535
pps
976 pps
trusted-mcast
Specifies the trusted multicast traffic rate limit. 1-65535
pps
1953
pps
trusted-ucast
Specifies the trusted unicast traffic rate limit. 1-65535
pps
65535
pps
untrusted-mcast
Specifies the untrusted multicast traffic rate limit. 1-65535
pps
1953
pps
untrusted-ucast
Specifies the untrusted unicast traffic rate limit. 1-65535
pps
9765
pps
Usage Guidelines
This command configures firewall bandwidth contract options on the controller.
Example
The following command disallows forwarding of non-IP frames between users:
(host) (config) #firewall deny-inter-user-bridging
Related Commands
(host) (config) #show firewall
Command History
Introduced in ArubaOS 3.4
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide firewall cp-bandwidth-contract | 386