Concept Guide

disable-whitelist-sync
disable-whitelist-sync
Description
This command disables whitelist synchronization with local or Cloud Services Controller on the master
controller. Whitelist database synchronization is enabled by default.
Syntax
No parameters.
Usage Guidelines
By default, the whitelist database synchronization is enabled between the master and local or cloud services
controller. Once the whitelist database entries are synchronized across all controllers, issue the disable-
whitelist-sync command on the master controller to disable the synchronization. Configuring this parameter
reduces the number of database queries on the master controller.
Enable this parameter to synchronize the whitelist database with all local or Cloud Services controllers. Once
synchronized, issue the disable-whitelist-sync command to disable the synchronization. Enabling this
parameter may increase the number of database queries on the master controller. Use this command when
the number of APs and local or Cloud Services controllers is high in the network.
Enabling the whitelist database synchronization may increase the mysqldb process CPU utilization on the master
controller if there is a large number of whitelist entries and local or cloud services controllers terminating on the
master.
Example
The following command disables whitelist synchronization.
(host) (config) #disable-whitelist-sync
Whitelist sync has been disabled
The following command re-enables whitelist synchronization if it was manually disabled.
(host) (config) #no disable-whitelist-sync
Whitelist sync has been enabled
Command History
Version Description
ArubaOS 6.4.3.0 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controller.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide disable-whitelist-sync | 350