Concept Guide

wlan hotspot anqp-domain-name-profile
wlan hotspot anqp-domain-name-profile <profile-name>
clone <profile-name>
domain-name <domain-name>
no ...
Description
This command defines the domain name to be sent in an Access Network Query Protocol (ANQP) information
element in a Generic Advertisement Service (GAS) query response.
Syntax
Parameter Description
clone <profile-name>
Make a copy of an existing ANQP domain name profile.
domain-name <domain-name>
Domain name of the hotspot operator. This alphanumeric string must
be 32 characters or less.
no
Remove an existing parameter.
Usage Guidelines
Use this command to configure a domain name in the ANQP Domain Name profile. If a client uses the Generic
Advertisement Service (GAS) to post an ANQP query to an Access Point, the AP will return an ANQP Information
Element with the domain name configured in this profile.
Values configured in this profile will not be sent to clients unless you:
1. Associate the ANQP Domain Name profile with an ANQP advertisement profile. (wlan hotspot
advertisement profile <profile-name> anqp-domain-name-profile <profile-name>)
2. Associate the ANQP advertisement profile with a Hotspot profile. (wlan hotspot h2-profile
advertisement-profile <profile-name> )
3. Enable the hotspot feature within that Hotspot profile. (wlan hotspot h2-profile <profile-name>
hotspot-enable )
Example
The following command defines a domain name for the ANQP domain name profile domain1.
wlan hotspot anqp-domain-name-profile domain1
domain-name example.com
Command History
This command was introduced in ArubaOS 6.4
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wlan hotspot anqp-domain-name-profile | 2295