Concept Guide

service
service [dhcp] [dhcpv6] [network-storage] [print-server]
Description
This command enables the DHCP server on the controller.
Syntax
Parameter Description Default
dhcp Enables the DHCP server disabled
dhcpv6 Enables the DHCPv6 server disabled
network-storage Enables the NAS service disabled
print-server Enables the printer service disabled
Usage Guidelines
You can enable and configure DHCP, DHCPv6, network-storage or print server in the controller to provide the
following:
l DHCP: IP addresses to wireless clients if an external DHCP server is not available.
l DHCPv6: IPv6 addresses to wireless clients if an external DHCPv6 server is not available.
l Network-storage: To provide access to the storage devices attached to the controller.
l Printer-server: To provide access to printers attached to the controller.
Example
The following command enables the DHCP server in the controller:
(host) (config) #service dhcp
The following command enables the DHCPv6 server in the controller:
(host) (config) #service dhcpv6
The following command enables the NAS services in the controller:
(host) (config) #service network-storage
The following command enables the printer services in the controller:
(host) (config) #service print-server
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide service | 776