Concept Guide

airgroup
airgroup
server-refresh <mac>
test-server <name> <macaddr>
active-domain <STRING>
active-wireless-discovery {disable|enable}
cppm-server {aaa {no|rfc-3576-server <rfc3576_server>|rfc3576_udp_port <rfc3576_udp_
port>|server-dead-time <server-dead-time>|server-group <server-group>}|enforce-
registration|query-interval <1..24>}
disable
dlna {disable|enable}
domain <STRING>
enable
global-credits <query packets> <response packets>
ipv6
location-discovery {disable|enable}
mdns {disable|enable}
policy <mac> {grouplist {STRING|add|remove}|location{ap-fqln|ap-group|ap-name}|no
{grouplist|location {ap-fqln|ap-group|ap-name}|rolelist|userlist}|rolelist
{STRING|add|remove}|userlist {STRING|add|remove}}
service <STRING> {disable|enable}
static <mdns-record>
vlan <NUMBER>
Description
This command configures AirGroup global settings, domain, and active-domain parameters.
Syntax
Parameter Description Range Default
server-refresh <mac>
Sends refresh packet to refresh
the cache for a AirGroup server.
<mac> is the MAC address of the
AirGroup server.
— —
test-server
<name> <macaddr>
Tests the AirGroup RADIUS
server. <name> is the name of
the RADIUSserver and
<macaddr> is the MAC address
of the RADIUS server.
— —
active-domain <STRING>
Configures an AirGroup active-
domain for an AirGroup cluster.
NOTE: This parameter is
available only in Config mode.
— —
active-wireless-
discovery
{disable|enable}
Disables/Enables wireless
discovery.
If wireless discovery is enabled,
controller actively sends refresh
requests to discover wireless
servers.
— disable
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide airgroup | 134