Concept Guide

wlan ht-ssid-profile
wlan ht-ssid-profile <profile-name>
40MHz-enable
80MHz-enable
ba-amsdu-enable
clone <profile-name>
high-throughput-enable
ldpc
legacy-stations
max-rx-a-mpdu-size {8191|16383|32767|65535}
max-tx-a-mpdu-size <bytes>
max-tx-a-msdu-count-be {0-15}
max-tx-a-msdu-count-bk {0-15}
max-tx-a-msdu-count-vi {0-15}
max-tx-a-msdu-count-vo {0-15}
max-vht-mpdu-size
min-mpdu-start-spacing {0|.25|.5|1|2|4|8|16}
mpdu-agg
no...
short-guard-intvl-20MHz
short-guard-intvl-40MHz
short-guard-intvl-80MHz
stbc-rx-streams
stbc-tx-streams
supported-mcs-set <mcs-list>
temporal-diversity
very-high-throughput-enable
vht-mu-txbf-enable
vht-supported-mcs-map
vht-txbf-explicit-enable
vht-txbf-sounding-interval
Description
This command configures a high-throughput SSID profile.
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the profile. The
name must be 1-63 characters.
— “default”
40MHz-enable
Enable or disable the use of this high-
throughput SSID in 40 MHz mode.
— enabled
80MHz-enable
Enable or disable the use of 80 MHz
channels on Very High Throughput (VHT)
APs.
— enabled
ba-amsdu-enable
Enable or disable Receive AMSDU in Block
ACK(BA) negotiation. If enabled, AP denies
clients from sending AMSDU using BA
agreement.
— enabled
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide wlan ht-ssid-profile | 2329