Concept Guide

show ap spectrum debug status
show ap spectrum debug status {ap-name <ap-name>}|{ip-addr <ip-addr>} freq-band 2.4ghz|5ghz
Description
This command shows detailed status and statistics for a spectrum monitor or hybrid AP.
Syntax
Parameter Description
ap-name <ap-name>
Name of the spectrum device for which you want to view status information.
ip-addr <ip-addr>
IP address of the spectrum device for which you want to view status
information.
freq-band 2.4ghz|5ghz
View information for a specific radio type, either 2.4 GHz or 5 GHz.
Usage Guidelines
Use this command under the guidance of a Dell technical support representative to troubleshoot spectrum
analysis errors.
Related Commands
Command Description Mode
ap spectrum local-override
Convert an AP or AM into a
spectrum monitor by adding
it to the spectrum local-
override list.
Config mode on
master or local
controllers
rf dot11a-radio-profilemodespectrum-mode
Set a 802.11a radio so the
device operates as an
spectrum monitor, and can
send spectrum analysis
data to a desktop or laptop
client.
Config mode on
master or local
controllers
rf dot11g-radio-profilemodespectrum-mode
Set a 802.11g radio so the
device operates as an
spectrum monitor, and can
send spectrum analysis
data to a desktop or laptop
client.
Config mode on
master or local
controllers
Command History
Introduced in ArubaOS 6.0.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap spectrum debug status | 1294