Concept Guide

Table Of Contents
Parameter Description
Neighbor Count Details the number of neighbors and adjacent neighbors.
Tx Stat Counters and statistics for transmitted data.
l Hellos: Number of transmitted hello packets. These packets are sent
every hello interval.
l DbDescr: Number of transmitted database description packets.
l LsReq: Number of transmitted link state request packets.
l LsUpdate: Number of transmitted link state update packets.
l LsAck: Number of transmitted link state acknowledgment packets
l Pkts: Total number of transmitted packets.
Rx Stat Counters and statistics for received data.
l Hellos: Number of received hello packets. These packets are sent
every hello interval.
l DbDescr: Number of received database description packets.
l LsReq: Number of received link state request packets.
l LsUpdate: Number of received link state update packets.
l LsAck: Number of received link state acknowledgment packets
l Pkts: Total number of received packets.
DisCd Number of received packets that are discarded.
BadVer Number of received packets that have bad OSPF version number.
BadNet Number of received packets that belong to different network than the
local interface.
BadArea Number of received packets that belong to different area than the local
interface.
BadDstAdr Number of received packets that have wrong destination address.
BadAuType Number of received packets that have different authentication type than
the local interface.
BadAuth Number of received packets where authentication failed.
BadNeigh Number of received packets which didn’t have a valid neighbor.
BadPckType Number of received packets that have wrong OSPF packet type.
BadVirtLink Number of received packets that didn’t match have a valid virtual link.
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ip ospf | 1612