Concept Guide

Column Description
old-rx
The total number of deauthorization frames sent to this MAC address for
containment until the previous timer tick.
FRR
Frame retry rate, in frames per second.
FRER
Frame error retry rate, in frames per second.
rssi-index
This value indicates the number of consecutive timer ticks over which the
value of the Receive Signal Strength Indicator (RSSI) of the client has reduced
by more than 3 units.
NOTE: This value is updated only if 'handoff-assist' is enabled in the AP’s RF
Optimization profile.
cur-signal
The Receive Signal Strength Indicator (RSSI) of the most recent frame
received from the specified MAC address.
old-cur-signal
The most recent Receive Signal Strength Indicator (RSSI) of the MAC which is
3 lower or 5 higher than the current RSSI.
NOTE: This value is updated only if 'handoff-assist' is enabled in the AP’s RF
Optimization profile
ht-type
This parameter indicates support for the following HT types:
no: No support for high-throughput.
HT-20: Support for 20 Mhz high-throughput only.
HT-40: Support for 40 Mhz high-throughput.
primary-channel
Primary radio channel.
sec-channel
Secondary radio channel
gf-supported
If 1, this AP supports greenfield mode. If 0, greenfield is not supported.
40mhz-intolerance
Indicates whether the specified MAC address is 40 Mhz intolerant.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap monitor stats | 1229