User's Manual

615 Using Push
The Pad Grid When Step Sequencing Pitches.
When using the Melodic Sequencer, all eight rows of pads allow you to place notes in the clip.
You can adjust the loop length and access additional step sequencing pages via the loop length
pads (page 616). The loop length pads can be momentarily accessed in the top row while
holding the Note button.
You can also lock the loop length pads in place. To do this, hold Shift and tap the Note button.
(Note that Push remembers this locked/unlocked state for each track.) To unlock the loop length
pads, press the Note button again.
With In Key selected, each row corresponds to one of the available pitches in the currently se-
lected scale. With Chromatic selected, notes that are in the key are lit, while notes that are not in
the key are unlit. The light blue row (which is the bottom row by default) indicates the root of the
selected key. Each column of pads represents a step in the resolution set by the Scene/Grid but-
tons.
As with the real-time playing layout, pressing the Octave Up and Down button shifts the range
of available notes. You can also use the touch strip to change the range. (Tip: hold the Shift key
while adjusting the touch strip or pressing the Octave buttons to fine tune the pitch range.) After
adjusting the pitch range or when switching between the real-time and step sequencing layouts,
the display will briefly show the available range.
Play Position
Loop Length Controls
Step Sequencer Controls