Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Getting Started
- 3 Basic Operation
- 4 Sonde Menu
- 5 PC6000 Software
- 6 Principles of Operation
- 7 Maintenance
- 8 Troubleshooting
- 9 Communication
- Appendix A Health and Safety
- Appendix B Require Notice
- Appendix C Warranty and Service Information
- Appendix D Accessories and Reagents
- Appendix E Application Note
- Appendix F Solubility and Pressure/Altitude Tables
- Appendix G Sensor and Sonde Storage Recommendations
- Appendix H Turbidity Measurements with the 6000UPG
- Appendix I System Errors and Warnings
2-18
To start, highlight Setup then press Enter. Check the default setup values.
Select this option to enter the number of the Comm port (1 or 2) to which the 6000
UPG is connected.
Be sure to press
Enter to confirm a new entry. If the default setting is correct there is no need to
change it.
Select this option to check the baud rate. If the baud rate is not set to 9600, set it to 9600. To set
the baud rate, highlight it and press
Enter. A list of possible baud rates will appear. Select 9600
from the list and press
Enter. NOTE: The Model 6000UPG default baud rate is 9600.
Select this option to specify the parallel port (LPT1, LPT2 or LPT3) to which your printer is
connected. If no printer is connected select LPT1. Press
Enter after making your selection.
Select this option to select the type of printer connected to your computer system. From the list,
choose the selection that best describes your printer. If your printer is not on the list, refer to your
printer's instruction manual to determine what type of printer your printer emulates. Press
Enter
after making your selection.
---DISPLAY -FORMATS---------COMPUTER-CONNECTIONS-------------
Date format: MDY Comm port: 1
Date separator: / Baud rate 9600
Time separator: : Printer Port 1
Radix mark: . Printer type HP LaserJet laser
-------MORE-SETUP-------------COMPUTER-DISPLAY----------------------
Data capture setup... Menu colors: User-defined menu colors
Advanced Setup... Plot colors: User-defined plot colors
Graphics mode: Automatic selection hi-res
Comm port:
Baud rate:
Printer port:
Printer type: