Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Getting Started
- 3 Basic Operation
- 4 Sonde Menu
- 5 PC6000 Software
- 6 Principles of Operation
- 7 Maintenance
- 8 Troubleshooting
- 9 Communication
- Appendix A Health and Safety
- Appendix B Require Notice
- Appendix C Warranty and Service Information
- Appendix D Accessories and Reagents
- Appendix E Application Note
- Appendix F Solubility and Pressure/Altitude Tables
- Appendix G Sensor and Sonde Storage Recommendations
- Appendix H Turbidity Measurements with the 6000UPG
- Appendix I System Errors and Warnings
A-1
APPENDIX A
HEALTH AND SAFETY
INGREDIENTS:
• Iodine
• Potassium Chloride
• Water
WARNING: INHALATION MAY BE FATAL.
CAUTION: AVOID INHALATION, SKIN CONTACT, EYE CONTACT OR
INGESTION. MAY EVOLVE TOXIC FUMES IN FIRE.
Harmful by ingestion and inhalation. Skin or eye contact may cause irritation. Has a corrosive effect
on the gastro-intestinal tract, causing abdominal pain, vomiting, and diarrhea. Hypersensitivity may
cause conjunctivitis, bronchitis, skin rashes etc. Evidence of reproductive effects.
YSI Conductivity solutions: 3161, 3163, 3165, 3167, 3168, 3169
FIRST AID:
INHALATION: Remove victim from exposure area. Keep victim warm and at rest. In severe cases
seek medical attention.
SKIN CONTACT: Remove contaminated clothing immediately. Wash affected area thoroughly
with large amounts of water. In severe cases seek medical attention.
EYE CONTACT: Wash eyes immediately with large amounts of water, (approx. 10 minutes). Seek
medical attention immediately.
INGESTION: Wash out mouth thoroughly with large amounts of water and give plenty of water to
drink. Seek medical attention immediately.