Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Getting Started
- 3 Basic Operation
- 4 Sonde Menu
- 5 PC6000 Software
- 6 Principles of Operation
- 7 Maintenance
- 8 Troubleshooting
- 9 Communication
- Appendix A Health and Safety
- Appendix B Require Notice
- Appendix C Warranty and Service Information
- Appendix D Accessories and Reagents
- Appendix E Application Note
- Appendix F Solubility and Pressure/Altitude Tables
- Appendix G Sensor and Sonde Storage Recommendations
- Appendix H Turbidity Measurements with the 6000UPG
- Appendix I System Errors and Warnings

A-3
INGREDIENTS:
• Potassium Chloride
• Potassium Ferrocyanide Trihydrate
• Potassium Ferricyanide
CAUTION - AVOID INHALATION, SKIN CONTACT, EYE CONTACT OR INGESTION.
MAY AFFECT MUCOUS MEMBRANES.
May be harmful by inhalation, ingestion, or skin absorption. Causes eye and skin irritation.
Material is irritating to mucous membranes and upper respiratory tract. The chemical, physical, and
toxicological properties have not been thoroughly investigated.
Ingestion of large quantities can cause weakness, gastrointestinal irritation and circulatory
disturbances.
YSI Zobell Solution: 3682
FIRST AID:
INHALATION - Remove victim from exposure area to fresh air immediately. If breathing has
stopped, give artificial respiration. Keep victim warm and at rest. Seek medical attention
immediately.
SKIN CONTACT - Remove contaminated clothing immediately. Wash affected area with soap or
mild detergent and large amounts of water (approx. 15-20 minutes). Seek medical attention
immediately.
EYE CONTACT - Wash eyes immediately with large amounts of water (approx. 15-20 minutes),
occasionally lifting upper and lower lids. Seek medical attention immediately.
INGESTION - If victim is conscious, immediately give 2 to 4 glasses of water and induce vomiting
by touching finger to back of throat. Seek medical attention immediately.