User manual

149
(2) Motion detection
This option allows the NVR to trigger an action when a moving object is
detected by the IP camera or the video server. Select “Camera event” from
the “Event List”. Locate the channel and click “Motion Detection”. Next, click
the edit button (
), enable this option, configure the settings, and click
“Apply”. You may also set the schedule to define the active period of the
alarm settings. After that, define the action on the right (discussed in the
later sections).
(3) Alarm event
The alarm input and the motion detection settings of some IP cameras or video
servers may be combined together and called “Alarm Event” on the Event List.
You can edit the event settings and define the action on the right (discussed in
the later sections).