User manual
Table Of Contents
- Table of Contents
- Safety Warning
- Chapter 1. Introduction
- 1.1 Overview
- 1.2 Hardware Illustration
- 1.2.1 VS-8040U-RP/VS-8032U-RP/VS-8024U-RP
- 1.2.2 VS-8040/VS-8032/VS-8024
- 1.2.3 VS-6020 Pro/VS-6016 Pro/VS-6012 Pro
- 1.2.4 VS-5020/VS-5012
- 1.2.5 VS-4016U-RP Pro/VS-4012U-RP Pro/VS-4008U-RP Pro
- 1.2.6 VS-4016 Pro/VS-4012 Pro/VS-4008 Pro
- 1.2.7 VS-4016U-RP
- 1.2.8 VS-2012 Pro/VS-2008 Pro
- 1.2.9 VS-2012/VS-2008
- 1.2.10 VS-201P/V
- 1.2.11 NVR-104P/V
- 1.2.12 VS-101P/V
- Chapter 2. Install VioStor
- Chapter 3. Use VioStor by Local Display
- Chapter 4. Use VioStor by Web-based Interface
- Chapter 5. Playback the Video Files
- Chapter 6. System Administration
- Chapter 7. System Maintenance
- Chapter 8. LCD Panel
- Chapter 9. Troubleshooting
- Appendix A Dynamic Domain Name Registration
- Appendix B Configuration Examples
- Technical Support
- GNU GENERAL PUBLIC LICENSE
56
4.2 Monitoring Page
Upon successful login, the monitoring page will be shown. Select the display
language. You can start to configure the system settings and use the monitoring
and recording functions of the server.
Icon Description
Multi display mode:
VioStor supports multi-display mode. (This function
can only be used when the computer or the host is
connected to multiple monitors.)
Multi-server monitoring:
Up to 120 channels from multiple QNAP NVR servers can
be monitored.
Select language:
Select the display language.
E-map:
Display the location of the IP camera. The E-map can
be changed in system configuration page.
View
monitoring
channel
and details
PTZ
control
p
anel
System firmware
Adjust
display
mode
Server
name