User manual

122
6.3.4 Host Access Control
Specify
the connections to be allowed or denied to access VioStor. Choose one of
the following options to restrict the access from a network or an IP address (host) to
the server:
1. Allow all connections (Default setting)
Allow the connection from all the hosts to the server.
2. Allow connections from the list only
Allow the connection from the hosts specified on the list only.
Note: When this function is enabled, you can only use PC that the IP address
is listed on the connection list to connect or find VioStor. The IP address not
included in the list will not be able to detect VioStor not listed in allowed
connections.
3. Deny connections from the list
Deny the connection from the hosts specified on the list.
Note: Make sure your PC is added to the allowed list in order to connect to the
NVR. Otherwise, your PC will always be disconnected from the NVR.