User manual
Table Of Contents
- Table of Contents
- Safety Warning
- Chapter 1. Introduction
- 1.1 Overview
- 1.2 Hardware Illustration
- 1.2.1 VS-8040U-RP/VS-8032U-RP/VS-8024U-RP
- 1.2.2 VS-8040/VS-8032/VS-8024
- 1.2.3 VS-6020 Pro/VS-6016 Pro/VS-6012 Pro
- 1.2.4 VS-5020/VS-5012
- 1.2.5 VS-4016U-RP Pro/VS-4012U-RP Pro/VS-4008U-RP Pro
- 1.2.6 VS-4016 Pro/VS-4012 Pro/VS-4008 Pro
- 1.2.7 VS-4016U-RP
- 1.2.8 VS-2012 Pro/VS-2008 Pro
- 1.2.9 VS-2012/VS-2008
- 1.2.10 VS-201P/V
- 1.2.11 NVR-104P/V
- 1.2.12 VS-101P/V
- Chapter 2. Install VioStor
- Chapter 3. Use VioStor by Local Display
- Chapter 4. Use VioStor by Web-based Interface
- Chapter 5. Playback the Video Files
- Chapter 6. System Administration
- Chapter 7. System Maintenance
- Chapter 8. LCD Panel
- Chapter 9. Troubleshooting
- Appendix A Dynamic Domain Name Registration
- Appendix B Configuration Examples
- Technical Support
- GNU GENERAL PUBLIC LICENSE
187
Chapter 8. LCD Panel
* This section is applicable to the NVR models with an LCD panel only.
The NVR provides a handy LCD panel for you to perform the disk configuration and
view the system information.
When the NVR has started up, you will be able to view the server name and the IP
address:
N
V
R
5 F 4 D
E 3
1 6 9 . 2 5 4 . 1 0
0
.
1
0
0
For the first time installation, the LCD panel shows the number of the hard disk
drives detected and the IP address. You may select to configure the hard drives.
Number of
hard drives
detected
Default disk
configuration
Available disk configuration options*
1 Single Single
2 RAID 1 Single -> JBOD ->RAID 0 -> RAID 1
3 RAID 5 Single -> JBOD -> RAID 0 -> RAID 5
4 or above RAID 5
Single ->JBOD -> RAID 0 -> RAID 5
-> RAID 6
*Press the “Select” button to choose the option, and press the “Enter” button to
confirm.