User manual

164
6.7 System Tools
The System Tools enable you to optimize the system maintenance and management.
You can set the alert notification, restart or shut down the server, configure the
hardware settings, update the system firmware, back up/restore/reset the system
settings, set the E-map, and run the ping test.
6.7.1 Alert Notification
Enter
the email address of the administrator and the IP address of the SMTP server.
When an error occurs, e.g. power outage or a hard disk drive is unplugged, an alert
email will be sent to the specified recipients automatically. You can go to the
“Event Logs” to check the details of all the errors and warnings.
Note: It is recommended to send a test email to make sure the mail server settings
are correct.