User manual
Table Of Contents
- Table of Contents
- Safety Warning
- Chapter 1. Introduction
- 1.1 Overview
- 1.2 Hardware Illustration
- 1.2.1 VS-8040U-RP/VS-8032U-RP/VS-8024U-RP
- 1.2.2 VS-8040/VS-8032/VS-8024
- 1.2.3 VS-6020 Pro/VS-6016 Pro/VS-6012 Pro
- 1.2.4 VS-5020/VS-5012
- 1.2.5 VS-4016U-RP Pro/VS-4012U-RP Pro/VS-4008U-RP Pro
- 1.2.6 VS-4016 Pro/VS-4012 Pro/VS-4008 Pro
- 1.2.7 VS-4016U-RP
- 1.2.8 VS-2012 Pro/VS-2008 Pro
- 1.2.9 VS-2012/VS-2008
- 1.2.10 VS-201P/V
- 1.2.11 NVR-104P/V
- 1.2.12 VS-101P/V
- Chapter 2. Install VioStor
- Chapter 3. Use VioStor by Local Display
- Chapter 4. Use VioStor by Web-based Interface
- Chapter 5. Playback the Video Files
- Chapter 6. System Administration
- Chapter 7. System Maintenance
- Chapter 8. LCD Panel
- Chapter 9. Troubleshooting
- Appendix A Dynamic Domain Name Registration
- Appendix B Configuration Examples
- Technical Support
- GNU GENERAL PUBLIC LICENSE
144
6.6.4 Alarm Settings
The NVR pro
vides the “Traditional Mode” and the “Advanced Mode” for the alarm
settings. Select the “Traditional Mode” to use the standard alarm settings in
response to the alarm events. To use the advanced event management, select the
“Advanced Mode”.
Note: The VS-201/VS-101/NVR-104 does not support the Advanced Mode in the
“Alarm Settings”.
Traditional Mode
Select a channel (IP camera/video server) on the list and configure the alarm
settings. The video recording will be activated when the alarm input of the selected
channel is triggered or a moving object is detected.
When you enable the option “Activate alarm recording only on selected schedule”,
the alarm recording will be activated only when the alarm input is triggered or a
moving object is detected within the schedule. You can test the settings by clicking
“Test”. Click “Apply” to apply the settings to the selected channel. To apply the
same settings to all the channels on the list, click “Apply to all cameras”.