User manual
Table Of Contents
- Table of Contents
- Safety Warning
- Chapter 1. Introduction
- 1.1 Overview
- 1.2 Hardware Illustration
- 1.2.1 VS-8040U-RP/VS-8032U-RP/VS-8024U-RP
- 1.2.2 VS-8040/VS-8032/VS-8024
- 1.2.3 VS-6020 Pro/VS-6016 Pro/VS-6012 Pro
- 1.2.4 VS-5020/VS-5012
- 1.2.5 VS-4016U-RP Pro/VS-4012U-RP Pro/VS-4008U-RP Pro
- 1.2.6 VS-4016 Pro/VS-4012 Pro/VS-4008 Pro
- 1.2.7 VS-4016U-RP
- 1.2.8 VS-2012 Pro/VS-2008 Pro
- 1.2.9 VS-2012/VS-2008
- 1.2.10 VS-201P/V
- 1.2.11 NVR-104P/V
- 1.2.12 VS-101P/V
- Chapter 2. Install VioStor
- Chapter 3. Use VioStor by Local Display
- Chapter 4. Use VioStor by Web-based Interface
- Chapter 5. Playback the Video Files
- Chapter 6. System Administration
- Chapter 7. System Maintenance
- Chapter 8. LCD Panel
- Chapter 9. Troubleshooting
- Appendix A Dynamic Domain Name Registration
- Appendix B Configuration Examples
- Technical Support
- GNU GENERAL PUBLIC LICENSE

147
Events:
The events supported by the NVR are classified as camera events (motion
detection, alarm input, camera disconnection), NVR events (recording failure),
and external events (user-defined events).
Note: The camera events available vary according to the features supported by
the IP cameras or video servers.
Buttons on the event list
Add an external event. This button is not applicable to the camera
events and the NVR events.
Edit an event. This button cannot be used to edit camera
disconnection.
Delete an external event. This button is not applicable to the camera
events and the NVR events.