Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Getting Started
- 3 Basic Operation
- 4 Sonde Menu
- 5 PC6000 Software
- 6 Principles of Operation
- 7 Maintenance
- 8 Troubleshooting
- 9 Communication
- Appendix A Health and Safety
- Appendix B Require Notice
- Appendix C Warranty and Service Information
- Appendix D Accessories and Reagents
- Appendix E Application Note
- Appendix F Solubility and Pressure/Altitude Tables
- Appendix G Sensor and Sonde Storage Recommendations
- Appendix H Turbidity Measurements with the 6000UPG
- Appendix I System Errors and Warnings
5-8
Appendix E of this manual is an application note which will be very helpful as you prepare for data
collection to be used to compensate 6000
UPG data.
Select Control Info from the Modify menu. The Control Info menu will be displayed
+------------------------------------------------------------------------------+
¦ Sonde File Setup Real-Time Exit YSI PC6000 ¦
¦------------------------------------------------------------------------------¦
¦ ¦
¦ ¦
¦ ¦
¦ +--------------------------------------------------------+ ¦
¦ ¦ Filename: SRUNS62O.DAT ¦ ¦
¦ ¦--------------------------------------------------------¦ ¦
¦ ¦ MODIFY ¦ VIEW ¦ SYSTEM ¦ ¦
¦ ¦------------------+------------------+------------------¦ ¦
¦ ¦ Parameters... ¦ Header ¦ Print Report ¦ ¦
¦¦Control Info... ¦ Report ¦ Print Plot ¦ ¦
¦ ¦ Scaling Info... ¦ Plot ¦ Definitions... ¦ ¦
¦ ¦ ¦ Statistics ¦ Export ¦ ¦
¦ +--------------------------------------------------------+ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦------------------------------------------------------------------------------¦
¦ View or change the title or timing information for the report/plot ¦
+------------------------------------------------------------------------------+
The Control Info menu allows you to report or plot an entire file, or any portion of a file. Other
options on the Control Info menu allow you to average several data points together and set up
reports and plots to display data in the format you choose.
+------------------------------------------------------------------------------+
¦ Sonde File Setup Real-Time Exit YSI PC6000 ¦
¦------------------------------------------------------------------------------¦
¦ ¦
¦ Enter title line ¦
¦ SRUNS62O.DAT ¦
¦ ¦
¦ First sample was at: 05/03/96 8:15:00 ¦
¦ Enter start time: begin ¦
¦ Enter stop time: end ¦
¦ Last sample was at: 06/01/96 19:00:00 ¦
¦ ¦
¦ Logging interval was: 900 seconds ¦
¦ Enter averaging interval: 0 ¦
¦ ¦
¦ X-axis time per screen: 42405 ¦
¦ ¦
¦ Cross-parameter style: AVG ¦
¦ Cross-parameter bins: 100 (maximum 2550) ¦
¦ ¦
¦ Parameters per plot: 2 ¦
¦ ¦
¦------------------------------------------------------------------------------¦
¦ Enter a title for the report or plot (it will be centered for you) ¦
+------------------------------------------------------------------------------+
Enter title line