User's Guide

© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-WLC100P
46
Troubleshooting
Q1: How do I configure my computer’s network adapter with a static IP address?
Note: Please note that although the following procedures are provided to follow for your
operating system network adapter settings to be used as general guidelines, however, it
is strongly recommended that you consult your computer or operating system
manufacturer directly for assistance on the proper procedure for configuring network
settings. If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
Windows 2000/XP/Vista/7/8/8.1/10
a. On your keyboard, press Windows Logo + R keys simultaneously to bring up
the Run dialog box.
b. In the dialog box, type ncpa.cpl to bring up the Network Connections
window.
c. Right-click the Local Area Connection or Ethernet icon, click Properties, and
double-click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Use the following IP address and assign your network adapter a
static IP address.
(See example static IP address settings below)
 IP address: 192.168.10.25
 Subnet mask: 255.255.255.0
e. Click OK on both TCP/IPv4 Properties and Local Area Connection Properties
windows.
MAC OS X
a. From the Apple drop-down list, select System Preferences.
b. Click the Network icon.
c. From the Location drop-down list, select Automatic.
d. Select and view your Ethernet connection.
 In MAC OS 10.4, from the Show drop-down list, select Built-in
Ethernet and select the TCP/IP tab
 In MAC OS 10.5 and above, in the left column, select Ethernet.
e. Configure TCP/IP to use a static IP.
 From the Configure IPv4 or Configure drop-down list, select Manually
and assign your network adapter a static IP address. Then click the
Apply or Apply Now button.
(See example static IP address settings below)
 IP address: 192.168.10.25
 Subnet mask: 255.255.255.0
f. You may be prompted to restart your computer to apply the new IP address
settings.