User's Guide

© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-WLC100P
17
Reset your controller to factory defaults
Management > Maintenance
You may want to reset your controller to factory defaults if you are encountering
difficulties with your controller and have attempted all other troubleshooting. Before
you reset your controller to defaults, if possible, you should backup your controller
configuration first, see “Backup and restore your controller configuration settings” on
page 15.
There are two methods that can be used to reset your controller to factory defaults.
 Reset Button – Located on the rear panel of your controller, see “Product
Hardware Features” on page 2. Use this method if you are encountering
difficulties with accessing your controller management page.
OR
 Controller Management Page
1. Log into your controller management page (see “Access you wireless controller
management page” on page 10).
2. Click on Management and click on Maintenance.
3. In the Backup/Restore System Configuration section, click Restore to factory default.
Controller default settings
Administrator User Name
admin
Administrator Password
admin
Controller IP Address
192.168.10.200
Controller Subnet Mask
255.255.255.0
Controller Default Gateway
192.168.10.1
Primary DNS Server
192.168.10.1