Technical data

2. Rescue Media Contents Selection
"Acronis True Image Echo Workstation (Full version)" is to be selected.
This version contains the drivers required for booting USB media.
3. Bootable Media Selection
Select the USB stick from the list. The stick is displayed as "Removable
Drive" [e.g. Removable Disk (E:)].
4. Proceed
Finishing the wizard and starting the creation of a bootable USB stick.
9.2.11 Network Support
Windows software
No settings are required for the Windows software. The available Windows
network is used.
Bootable rescue media, Startup
Recovery Manager
Network with DHCP server
In networks with DHCP server it is not necessary to make settings neither in
the bootable rescue media nor after the start of Acronis True Image via the
Startup Recovery Manager.
Network without DHCP Server
In networks without DHCP server it is not necessary to enter data manually
after the start of the bootable rescue media or after the start of Acronis True
Image via the Startup Recovery Manager. Via Extras ▶ Options the network
adapter (eth0) can be configured. At least the IP address, the subnet mask and
the default gateway are to be entered.
Network adapter Display of the network adapter
Hardware address Display of the MAC address
DHCP Display if used/not used
IP address Entry of the IP address
Subnet mask Entry of the subnet mask
DNS suffix Optional
Default gateway
Entry of the IP address of the default gate‐
way
DNS server Optional
WNS server Optional
Fig.9-8: Manual network configuration of the rescue media
If the network settings are manually entered, after double-clicking "Computers
near me" partially no network resources are indicated. Here the UNC path name
must be entered in the file name box (e. g. "\\server\Enable\" or "\\<ip_address>
\enable\"). When accessing another computer in the network the user name
and the password are requested. To log in a Windows domain, place the name
of the domain followed by a backslash before the user name (e. g."domain
\user").
9.2.12 Planning Tasks
To keep the backups automatically as up-to-date as possible, tasks can be
created (time-controlled backup orders).
We recommend you to determine, that such tasks are executed at
times, at which the control systems are not in productive operation.
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 69/101
Software