Technical data

In order to explore an incremental backup the following backups
must be available: all before created incremental backups and the
full backup, which served as basis. Even if only one part of the
backup is missing, the exploration cannot be performed. In order to
explore a differential backup, the full backup, which served as basis,
must be available.
By double-clicking the archive to be opened is selected. The partition from
which the archive contains data and the creation date are displayed.
Fig.9-6: Explorer display
After double-clicking on the drive icon all directories contained in the archive
are displayed. Directories can be opened and explored and data can be copied
from the directories, if necessary.
If an image archive consists of several partial archives, they must
be available as a whole to include the contained images. Therefore,
it is not possible to integrate images distributed on CDs/DVDs. If
this should be necessary, all partial archives must be copied in a
common directory on the hard disk.
9.2.9 Removing Image Archives
The function for removing image files is in "Explore Backup Archives". This is
a subfunction of "Explore and Validate Backup Archives". After clicking "Explore
Backup Archives" a window opens for selecting the archive to be removed.
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 67/101
Software