Technical data
Recovery of a hard disk or partition
with the Startup Recovery Manager
For recovery of a hard disk or partition with Startup Recovery Manager do the
following:
Reboot the PC and press the F11 key as soon as the following message ap‐
pears:
Starting Acronis Loader...
Press F11 for Acronis Startup Recovery Manager...
Select the "Acronis True Image Echo Workstation (Full version)" with the key
(arrow to top) and press the enter key. Acronis True Image Echo Workstation
starts.
After clicking "Recovery", the wizard for image creation starts:
1. Welcome to the Restore Data Wizard!
Wizard start window.
2. Backup Archive Selection
Select the image archive to be restored.
3. If the selected archive is password-protected, the Archive Protection dia‐
log appears for entering the password.
4. Backup Date Selection
This dialog displays all images (including data of creation and comment)
of the archive, which was selected under ②.
Select the image to be restored.
5. Restoration Type Selection
Recovery of a hard disk, partitions or individual files or directories can be
selected.
6. Partition or Disk to Restore
If in step ⑤ "Restore disks or partitions" was selected, this dialog is dis‐
played. The hard disk or partition to be restored can be defined here.
7. Restored Partition Location
Select the partition, on which the image is to be restored.
Caution: The target zone is to be carefully selected, so that the right hard
disk zone is overwritten.
● If you select a target hard disk or a target partition, the selected target
hard disk or partition is overwritten.
● If as target sector a non-partitioned sector of the hard disk is speci‐
fied, a new partition is created.
8. Restored Partition Type
If the partition, containing the operating system, is restored, "Active" must
be selected. For all further partitions select "Logical".
9. Restored Partition Size
This dialog allows the reducing of partitions to be restored.
10. Next selection
Choose if a further partition or hard disk is to be restored. If this is not the
case, select "No I do not".
11. Restoration Options
Here further options can be selected, for example:
● The validation of the backup archive before recovery.
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 65/101
Software