Technical data

The Acronis Startup Recovery Manager can be activated only to‐
gether with the Acronis Secure Zone.
Creating the Acronis Secure Zone
The Acronis Secure Zone is not implemented on Rexroth industrial PCs as
default. After a hard disk exchange a saved hard disk image is restored, it also
might be necessary to recreate the Secure Zone.
Create the Acronis Secure Zone in the main program window via "Activate Ac‐
ronis Startup Recovery Manager". After the selection a wizard guides you
through the required steps:
1. Welcome to the Activate Acronis Startup Manager Wizard!
Wizard start window.
2. Create Acronis Secure Zone
Selecting the partition on which Acronis Secure Zone is to be created.
Note: We recommend you not to use the operating system partition, but
for example the D:\ partition.
3. Size
Enter the desired size of the Acronis Secure Zone via a slider or direct
input. The proposed value can be taken as the size of Acronis Secure
Zone can be changed at any time via "Manage Acronis Secure Zone" in
"Tools" (on the left of the main program window).
Note: To have enough memory space for a basic backup and supplemen‐
tary incremental backups, a size of 10 GB (min.) is recommended. The
memory space reserved for Acrons Secure Zone cannot be used for other
applications.
4. Acronis Secure Zone Protection
A password can be entered for accessing the Acronis Secure Zone.
Caution: The password must be case sensitive!
5. Proceed
Finishing the wizard. If Acronis Secure Zone is created, the wizard dis‐
plays a message. Press the OK button to complete the process.
After creation of the Acronis Secure Zone, the Acronis Startup Re‐
covery Manager is automatically activated. During each boot proc‐
ess before starting Windows XP a message appears for approx. 3
seconds
Starting Acronis Loader...
Press F11 for Acronis Startup Recovery Manager...
The Acronis Startup Recovery Manager can be deactivated or re‐
activated via "Activate Acronis Startup Recovery Manager" at any
time.
9.2.4 Creating Image Archives
Before the image creation it must ensured, that there is enough
space on the target data carrier to store the image archive.
60/101 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VSB 40.3 | Project Planning Manual
Software