Technical data

Fig.9-14: SMART information about the integrated hard disk
If the system is configured as RAID system, no information is avail‐
able!
9.4.5 HW Monitor
In the "HW Monitor" dialog the current values of different operating parameters
can be displayed. After pressing the "Start" button, the values available are
shown. Use the "Refresh Interval[s]" slider for setting the interval for renewing
data from one to ten seconds. When pressing the "Stop" button, the currently
determined values are "frozen" and the refresh is stopped.
The following information can be shown (if available):
● CPU Temp. [C]
CPU temperature Celsius
● CMOS Bat. [V]
Voltage of the CMOS battery (button cell) in [V]
● CPU Fan [1/min]
Revolutions of the CPU fan in r/min
● Case Fan [1/min]
Revolutions of the housing fan in r/min
78/101 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VSB 40.3 | Project Planning Manual
Software