Technical data
For devices provided with a touch screen, a software is preinstalled
for permanent availability of this function (see chapter 9.5 "Simu‐
lation of the Right Mouse Button" on page 79).
Set Sensitivity
Use the "Set Sensitivity" slider for setting the sensitivity with which the mouse‐
pointer follows the movement. Click "Apply" for applying the settings.
9.4.3 El. Type Plate
The "El. Type Plate" dialog gives information about the "electronic type plate",
of the basic devices (local) and of the displays connected to the basic operating
devices (remote). Use the "Reread" button for displaying current data.
The following information can be shown.
● Material text
Material designation of the device
● Material
Parts number
● Index
Output index of the device
● Serial no.
Serial number of the device
● Power On Hours
Display of the operating hours up to now
Fig.9-13: Display of the data of the electronic type plate
9.4.4 SMART
This dialog shows the SMART (Self-Monitoring, Analysis and Reporting Tech‐
nology) information about the integrated hard disk or the solid state drive (SSD).
The IPC service program evaluates the SMART parameters cyclically, see
chapter 9.6 "IPC Service Program" on page 80.
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 77/101
Software