User manual

Table Of Contents

8. After configuring the auto cruising settings, check the box “Enable auto cruising”

and click “OK”. The NVR will start auto cruising according to the settings.

Note:

1) The default staying time (interval) of the preset position is 5 seconds. You

can enter 5–999 seconds for this setting.

2) The system supports up to 10 preset positions (the first 10) configured on the

PTZ cameras. You can configure up to 20 settings for auto cruising on the

NVR. In other words, the NVR supports maximum 10 selections on the

drop-down menu and 20 settings on the auto cruising list.