User manual

65
You can configure the following settings:
Video Streaming
Stream from the server: If you cannot connect to the IP camera from your computer,
select this option and the NVR will stream the video from the NVR. This option does
not require extra port mapping configuration; but may influence the performance of
the NVR.
Stream from IP camera: If the NVR and the IP cameras are located on the same LAN,
select this option to stream the video from the IP camera. Note that you need to
configure the port forwarding settings on the IP cameras if the NVR, IP cameras, and
the computer are located behind a router, a virtual server, or a firewall.
Video Windows
a. Highlight the video window when an event is triggered: The video window will
flash if an event is triggered.
b. Display the windows without monitoring authority: Select this option to show
the channels that the user does not have access right to monitor.
c. Display the windows without configuration: Select this option to show the
channels that have not been configured.
Event Notification: When enabled and an event is triggered, the alert icon
will be shown on the monitoring channel instantly. Click the icon to view the
alert details.
Display Order: Click “Reset” to reprioritize the monitoring channels to default
order.
Browser: Select to show or hide the toolbars of the IE browser.
Snapshot: Specify the location where the snapshots are saved and the image
format (JPEG or BMP).
Show timestamp and camera name: Show the time stamp and the camera name
on the snapshot.