User manual

155
(1) Recording
Select the channels (IP cameras or video servers) which will start recording
when an event occurs. You may also select the following options:
(i) Enter the time (in seconds) the recording should be executed after the
event is triggered.
(ii) Start recording when the event starts and stop recording when the event
ends.
The option (ii) is applicable to the duration events only. A duration event
is an event with the start and end time and lasts for a period of time. It
does not include the events related to status change, such as camera
disconnection or NVR recording failure.
If the action is triggered by a duration event and both settings (i, ii) are
enabled, the NVR will execute the second setting (ii) only.
Click “Select from the list” to select an action setting which has been
configured before.