User manual

152
Event schedule settings:
When you edit an event (not including camera disconnection, NVR events, and
external events), you can click “Set Schedule” to define when the alarm settings will
be active.
To create a new schedule, select “New” and enter the schedule name. The
schedule supports maximum 25 characters (double-byte characters, spaces, and
symbols are allowed). Select the day and time when the alarm settings should be
active. Click + to add a schedule; or – to delete a schedule. Up to 6 settings can
be defined for each schedule.
The settings will be shown on the graphical table. Click “Apply” to save the settings.
To use the same schedule for all the events, click “Apply to All Events”. You can also
select to use the default schedule or a formerly created schedule from the list. The
default alarm settings are active all day, every day.