User Manual

- 81 -
6. Troubleshooting
Check Belt Unit
Please see HELP for details
330 Blinks The belt unit is not properly installed. Remove and re-install the
belt unit.
Non Recommended Belt
Unit
Please see HELP for details
688-01,
688-02,
688-03,
688-04
Blinks Check the model number of the belt unit mentioned in the User's
manual. Use a belt unit that matches your machine.
Belt Unit Not Installed
Please see HELP for details
689 Blinks The belt unit is not properly installed. Remove and reinstall the
belt unit.
%COVER% Open.
Please see HELP for details
310, 311,
583
Blinks Indicated cover is open. Close the cover.
310: Output tray (Top cover), 311: Front cover, 583: Output tray
(Top cover)
Wait a Moment
Rebooting <n>
- Lights up Rebooting the printer.
Wait for a while.
Power Off and Wait for a
while
126:Condensing Error
Fatal 126 Blinks A condensation has occurred inside a printer.
Turn the printer off and turn on again after a while.
Message Error
code
Indicato
r
Cause/Solution
Power Off/On
nnn:Error
260, 261,
262, 263,
264, 265,
266, 267,
268, 269,
270, 271,
272, 273,
274
Blinks An error has occurred in or around the fuser unit.
Check that size and thickness of paper in the tray is correctly.
Turn off the printer and turn on again after a while.
If the error persists after rebooting, contact your dealer and tell
them the number in the error message and how the machine
works.
136-02,
136-04,
980
Blinks An error has occurred in or around the fuser unit.
Turn off the printer and turn on again after a while.
If the error persists after rebooting, contact your dealer and tell
them the number in the error message and how the machine
works.
136-03 Blinks An error has occurred in or around the fuser unit.
Turn off the printer and turn on again after a while.
If the error persists after rebooting, contact your dealer and tell
them the number in the error message and how the machine
works.
231-05,
231-06,
231-07,
231-08,
231-23
Blinks Reading the consumables information failed.
If the following number is displayed, replace the corresponding
consumable.
231-05 to 231-08: Toner cartridge / Image drum
231-23: Fuser unit/ Belt unit
Turn off the printer and turn on again after a while.
If the error persists after rebooting, contact your dealer and tell
them the number in the error message and how the machine
works.
131, 132,
133, 134
Blinks The LED head cannot be detected.
131: Yellow (Y)
132: Magenta (M)
131: Cyan (C)
134: Black (K)
nnn* Blinks Turn off the machine, and then back on.
If the same error occurs, contact your dealer.
Power Off/On
nnn:Fatal Error
PC:nnnnnnnn
LR:nnnnnnnn
FR:nnnnnnnn
Fatal,
002~011,
F0C, F0D,
FFE, FFF
Blinks An error occurred inside the printer. Turn off the printer and then
on again.
Message Error
code
Indicato
r
Cause/Solution