User Manual
Table Of Contents
- Table of contents
- Before starting
- Setup
- Connecting to a Computer
- Connection Method and Flow
- Product Requirements
- Types of Drivers
- Connecting to a Wireless LAN
- Connecting a USB Cable
- Connecting a LAN Cable
- Installing a Printer Driver to a Computer
- Selecting a connecting method between different segments
- Energy Saving Function
- Troubleshooting
- When an Error Message Appears on the Display Screen (When the ATTENTION Indicator Lights Up/Blinks)
- Error Messages
- When Paper Jams Occur
- Other Issues
- Unable to Print from a Computer
- Unable to Install a Printer Driver Successfully
- Image Quality Issues
- Vertical White Lines Appear
- Printed Images are Fading Vertically
- Printed Images are Light
- White Spots and Lines Appear
- Dew Condensation Appears on Printed Paper
- Vertical Lines Appear
- Horizontal Lines and Spots Appear Periodically
- White Area on Paper is Lightly Stained
- The Periphery of Characters is Smudged
- The Entire Paper Area is Lightly Stained When Printing on Envelopes or Coated Paper
- Toner Comes Off When Printed Paper is Rubbed
- Uneven Gloss
- Black or White Dots Appear
- Dirt is Printed
- The Entire Page is Printed Black
- Nothing is Printed
- White Patches Appear
- Color of the printed image is not what you expect
- Feeding Issues
- Problems on the Machine
- Maintenance
- Replacing Consumables and Maintenance Units
- Cleaning
- Moving This Machine
- Transporting This Machine
- Before the printer disposal
- Deleting a Printer Driver
- Updating a Printer Drivers
- Updating the Firmware
- Appendix
- Menu Map
- Contact Us
- 21 -
2. Setup
Preparing Your Printer
This section explains how to unpack your printer and a set of consumables and paper.
• Unpacking
• Installing Consumables
• Loading Paper
• Be sure to use the consumables or maintenance units provided with this printer at first. Otherwise, the life of the
consumables or maintenance units may not be displayed correctly, or you may not be able to use them later.
• Use extra care when handling the image drum (the green cylinder), because it is fragile.
• Do not expose the image drum to direct sunlight or strong light (approximately 1,500 lux or more). Even under room
lighting, do not leave the image drum for 5 minutes or more.
• Packaging and cushioning materials are required for transporting the machine. Do not dispose of it, and keep it for
future use.
1
Remove the machine from the box, and then remove all cushioning materials
and the plastic bag from the machine.
2
Remove the two strips of protective tape at the back of your printer.
3
Lift the machine, and then place it where it is to be installed.
• If you use optional additional tray units, see "Options" in "Appendix".
Unpacking
Injury may result.
Lift this machine by 2 persons, because it weighs approximately 40 kg.