User Manual
Table Of Contents
- Table of contents
- Before starting
- Setup
- Connecting to a Computer
- Connection Method and Flow
- Product Requirements
- Types of Drivers
- Connecting to a Wireless LAN
- Connecting a USB Cable
- Connecting a LAN Cable
- Installing a Printer Driver to a Computer
- Selecting a connecting method between different segments
- Energy Saving Function
- Troubleshooting
- When an Error Message Appears on the Display Screen (When the ATTENTION Indicator Lights Up/Blinks)
- Error Messages
- When Paper Jams Occur
- Other Issues
- Unable to Print from a Computer
- Unable to Install a Printer Driver Successfully
- Image Quality Issues
- Vertical White Lines Appear
- Printed Images are Fading Vertically
- Printed Images are Light
- White Spots and Lines Appear
- Dew Condensation Appears on Printed Paper
- Vertical Lines Appear
- Horizontal Lines and Spots Appear Periodically
- White Area on Paper is Lightly Stained
- The Periphery of Characters is Smudged
- The Entire Paper Area is Lightly Stained When Printing on Envelopes or Coated Paper
- Toner Comes Off When Printed Paper is Rubbed
- Uneven Gloss
- Black or White Dots Appear
- Dirt is Printed
- The Entire Page is Printed Black
- Nothing is Printed
- White Patches Appear
- Color of the printed image is not what you expect
- Feeding Issues
- Problems on the Machine
- Maintenance
- Replacing Consumables and Maintenance Units
- Cleaning
- Moving This Machine
- Transporting This Machine
- Before the printer disposal
- Deleting a Printer Driver
- Updating a Printer Drivers
- Updating the Firmware
- Appendix
- Menu Map
- Contact Us
- 158 -
8. Appendix
4
Lock the casters.
5
Set the tip-over protection tools.
6
Plug the power cord and the unplugged cables, and then turn on the machine.
After the additional tray unit is mounted, you need to check the mounting status and make
the settings of the printer driver.
Refer to “When Adding Options”.
If you want to load more paper, install additional tray units. You must set the printer driver
after installing.
When three or more additional trays are installed, attaching the Caster Base and setting the
tip-over protection tools are recommended for precluding tippling over.
1
Turn the machine off, and then unplug the power cord and all the cables.
• Be sure to turn the machine off and unplug the power cord and all the cables before installing the additional
tray. Installing the additional tray with the machine turned on may cause the machine and additional tray to
malfunction.
• If you mount the printer with the AC cord plugged, you may catch your foot on the cord and get injured.
Installing the Additional Tray Unit(s)
Model Number: TRY-C3J1
Injury may result.
Lift this machine by 2 persons, because it weighs approximately 40 kg.