Technical data

Fig.9-26: Overview RAID configuration

Save and exit the dialog with "Exit".

If a hard disk fails, the software outputs "Degrated" as status message of the

RAID system during booting. In the following example (fig. 9-27 "Hard disk fail‐

ure of the RAID system" on page 86) the right hard disk is failed at Port 1:

Fig.9-27: Hard disk failure of the RAID system

9.11.3 RAID System under Windows

RAID system in the device manag‐

A RAID system that was installed in the BIOS can be displayed in the device

manager under Windows. To do so, call the device manager (Start ▶ Set‐

tings ▶ Control Panel ▶ Administrative Tools ▶ Computer Manage‐

ment ▶ System Tools ▶ Device Manager).

"SCSI and RAID controllers" contains the "Intel(R) 82801 GHM SATA RAID

Controller" entry, see fig. 9-28 "RAID controller in the device manager" on page

87.

86/101 Bosch Rexroth AG | Electric Drives

and Controls

Rexroth IndraControl VSB 40.3 | Project Planning Manual

Software