Technical data

2. Select the "Advanced" dialog in the BIOS.
3. Select under "ATA/IDE Configuration" the "Enhanced" entry, see fig.
9-20 "Configure ATA/IDE as RAID" on page 83
Fig.9-20: Configure ATA/IDE as RAID
4. Select under "Configure SATA as" the "RAID" entry.
5. Select the "Boot" dialog in the BIOS.
6. Select under "Boot Prority Selection" the "Device Based" value, see fig.
9-21 "Select the boot priority" on page 83.
Fig.9-21: Select the boot priority
7. Exit and save the settings by pressing F10.
8. During subsequent booting the following is displayed, see fig. 9-22 "Dis‐
play of the boot process after RAID configuration" on page 84.
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 83/101
Software