Technical data

3. Temperature monitoring of the housing temperature, system temperature
and CPU temperature.
4. Standstill monitoring of the CPU fan and housing fan.
The "IPCSvc" program is located in the "C:\Support\IPCMaintenance\Setup-
IPCSvc.exe" directory. After starting the following dialog opens (fig. 9-19
"IPCSvc configuration dialog" on page 81):
Fig.9-19: IPCSvc configuration dialog
Each group of the dialog is responsible for a certain hardware monitoring.
If a monitored event occurs, the reaction set under "Select Action" is executed.
A message is preset, which is valid for the whole system, that displays the result
for the user in a message box. In addition, the system can be triggered for
shutdown.
In the "Select Test Intervall" zone the interval for tests is set.
9.7 USB Connection
The USB connection at the front can be disabled or enabled while the system
is booting. To do so, call the "C:\Support\IPCMaintenance\VxPUSBCtrl.exe"
program with the on (enabled) or off (disabled) parameters in the command
line. This setting is only enabled during the runtime of the system and is not
stored.
For a permanent setting start the VxPUSBCtrl.exe on|off command line
program while starting the system with the autostart function:
1. Open the "C:\Documents and settings\[USER]\Start menu\Program files
\Autostart" directory (replace the value for "USER" respectively).
2. Open the context-sensitive menu by right mouse-click and choose New.
Project Planning Manual | Rexroth IndraControl VSB 40.3 Electric Drives
and Controls
| Bosch Rexroth AG 81/101
Software