Technical data

Fig.9-22: Display of the boot process after RAID configuration
The assignment of hard disks to "Port 0" and "Port 1" is defined via the
connections, see fig. 9-23 "Position of the hard disk and assignment to the
ports" on page 84.
Port 1
Port 0
1
① Hard disks
Fig.9-23: Position of the hard disk and assignment to the ports
9. Press <CTRL+l> to call the RAID configuration dialog, see fig. 9-24 "RAID
configuration dialog in the BIOS" on page 85.
84/101 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VSB 40.3 | Project Planning Manual
Software