User manual
Table Of Contents
- Table of Contents
- Safety Warning
- Chapter 1. Introduction
- 1.1 Overview
- 1.2 Hardware Illustration
- 1.2.1 VS-8040U-RP/VS-8032U-RP/VS-8024U-RP
- 1.2.2 VS-8040/VS-8032/VS-8024
- 1.2.3 VS-6020 Pro/VS-6016 Pro/VS-6012 Pro
- 1.2.4 VS-5020/VS-5012
- 1.2.5 VS-4016U-RP Pro/VS-4012U-RP Pro/VS-4008U-RP Pro
- 1.2.6 VS-4016 Pro/VS-4012 Pro/VS-4008 Pro
- 1.2.7 VS-4016U-RP
- 1.2.8 VS-2012 Pro/VS-2008 Pro
- 1.2.9 VS-2012/VS-2008
- 1.2.10 VS-201P/V
- 1.2.11 NVR-104P/V
- 1.2.12 VS-101P/V
- Chapter 2. Install VioStor
- Chapter 3. Use VioStor by Local Display
- Chapter 4. Use VioStor by Web-based Interface
- Chapter 5. Playback the Video Files
- Chapter 6. System Administration
- Chapter 7. System Maintenance
- Chapter 8. LCD Panel
- Chapter 9. Troubleshooting
- Appendix A Dynamic Domain Name Registration
- Appendix B Configuration Examples
- Technical Support
- GNU GENERAL PUBLIC LICENSE
74
4. Select the data search mode.
Date and time search (Text entry)
i. Select the NVR server(s) and the IP camera(s)*.
ii. Click the “Text entry” tab.
iii. Select the recording type, the start and end time when the video is
recorded.
iv. Click “Preview” to preview the searched video.
v. Click “OK”.
* You can select 4 IP cameras at maximum.