User manual

177
8. The NVR displays the latest 10 remote replication records.
In the above example:
1. When the status is shown as “Failed (Remote access error)”: You may check if
the remote storage device is running or the network settings are correct.
2. When the status is shown as “Failed (An internal error occurred)”: You may
check the hard drive status of VioStor or check the Event Logs.
Note: The time required by VioStor to replicate the data to the remote storage
device varies depending on the network environment. If the remote replication
takes too long, some recording files may be overwritten by the NVR. To avoid this,
you are recommended to refer to the status messages to analyse the time required
for the remote replication and adjust the replication schedule accordingly.