User manual
Table Of Contents
- Table of Contents
- Safety Warning
- Chapter 1. Introduction
- 1.1 Overview
- 1.2 Hardware Illustration
- 1.2.1 VS-8040U-RP/VS-8032U-RP/VS-8024U-RP
- 1.2.2 VS-8040/VS-8032/VS-8024
- 1.2.3 VS-6020 Pro/VS-6016 Pro/VS-6012 Pro
- 1.2.4 VS-5020/VS-5012
- 1.2.5 VS-4016U-RP Pro/VS-4012U-RP Pro/VS-4008U-RP Pro
- 1.2.6 VS-4016 Pro/VS-4012 Pro/VS-4008 Pro
- 1.2.7 VS-4016U-RP
- 1.2.8 VS-2012 Pro/VS-2008 Pro
- 1.2.9 VS-2012/VS-2008
- 1.2.10 VS-201P/V
- 1.2.11 NVR-104P/V
- 1.2.12 VS-101P/V
- Chapter 2. Install VioStor
- Chapter 3. Use VioStor by Local Display
- Chapter 4. Use VioStor by Web-based Interface
- Chapter 5. Playback the Video Files
- Chapter 6. System Administration
- Chapter 7. System Maintenance
- Chapter 8. LCD Panel
- Chapter 9. Troubleshooting
- Appendix A Dynamic Domain Name Registration
- Appendix B Configuration Examples
- Technical Support
- GNU GENERAL PUBLIC LICENSE

119
Secondary DNS Server
Enter the IP address of the secondary DNS server that provides the DNS
service for VioStor on the external network.
Enable DHCP Server
If no DHCP server is available on the LAN where VioStor locates, you can enable
VioStor as a DHCP server to allocate dynamic IP address to the DHCP clients on the
LAN.
You can set the range of the IP addresses allocated by the DHCP server and the
lease time. The lease time refers to the time that the IP address is leased to the
clients by the DHCP server. When the time expires, the client has to acquire an IP
address again.
Note: If there is an existing DHCP server on the LAN, do not enable this function.
Otherwise, there will be IP address allocation failure and network access error.