User manual
Table Of Contents
- Contents
- 1. Before Use
- 2. Getting Started/Basic Operations
- Attaching the Shoulder Strap
- Charging the Battery
- Inserting the Card (Optional)
- Card Information
- Attaching a Lens
- Changing the Monitor Position
- Setting the Clock (When Turning On for the First Time)
- Basic Operations
- How to Hold the Camera
- Using the Viewfinder
- Shutter button (Taking pictures)
- Motion picture button (Recording motion pictures)
- Mode dial (Selecting a Recording Mode)
- Front Dial/Rear Dial
- Control Dial
- Cursor buttons/[MENU/SET] button
- [DISP.] button (switching the information display)
- Touch screen (Touch operations)
- Taking Pictures Using the Touch Function
- Setting menu items
- Quick Menu
- Fn Buttons
- Entering Text
- 3. Recording Modes
- 4. Focus, Brightness (Exposure) and Colour tone Settings
- 5. 4K Photo and Drive Settings
- 6. Stabiliser, Zoom and Flash
- 7. Recording Motion Pictures
- 8. Playing Back and Editing Images
- 9. Menu Guide
- 10. Using the Wi-Fi/Bluetooth function
- What you can do with the Wi-Fi®/Bluetooth® function
- Wi-Fi function/Bluetooth function
- Connecting to a smartphone
- Operating the Camera with a Smartphone
- Displaying pictures on a TV
- Sending images from the camera
- Sending images to a smartphone
- Printing Wirelessly
- Sending images to AV device
- Sending images to PC
- Using Web services
- Wi-Fi connections
- [Wi-Fi Setup] Menu
- 11. Connecting to other devices
- 12. Others
317
12. Others
∫ [Wind Cut]
This can reduce wind noise when an external microphone is being used.
Settings: [HIGH]/[STANDARD]/[LOW]/[OFF]
• This is available when an external microphone is connected.
• Setting [Wind Cut] may alter the usual sound quality.
By using the AC adaptor (optional) and DC coupler (optional), you can record and play
back without worrying about the remaining battery charge.
The optional DC coupler can only be used with the designated Panasonic AC adaptor
(optional).
> [Motion Picture] > [Wind Cut]
• While the external microphone is connected, [ ] is displayed on the screen.
• When the external microphone is connected, [Sound Rec Level Disp.] is automatically set to
[ON], and the sound rec level is displayed on the screen.
• When an external microphone is attached to the camera, do not hold only the external
microphone to prevent the camera from falling.
• When an external microphone is attached to the camera, do not open the built-in flash.
• If the noises are recorded when you use an AC adaptor (optional), use a battery.
• When a stereo microphone (VW-VMS10: optional) is used, [Special Mic.] is fixed to
[STEREO].
• When [Special Mic.] is set to [LENS AUTO], [S.SHOTGUN] or [MANUAL], [Sound Output] in
the [Motion Picture] menu is fixed to [REC SOUND].
• When [Special Mic.] is set to [MANUAL], you can use the Fn button function [Mic. Directivity
Adjust]. Press the set Fn button to display the range setting screen.
• For details, refer to the operating instructions of the external microphone.
AC adaptor (optional)/DC coupler (optional)
• Always use a genuine Panasonic AC adaptor (optional).
• When using an AC adaptor (optional), use the AC cable supplied with the AC adaptor.
• When the DC coupler is being mounted, the DC coupler cover opens, so the structure
ceases to be dust and splash resistant.
Be careful not to allow sand, dust and water etc. to adhere to or enter the structure. After use,
check that there is no foreign matter attached to the DC coupler cover, and close it firmly.
• For details, refer to the operating instructions of the AC adaptor and DC coupler.
MENU