User manual

10. Using the Wi-Fi/Bluetooth function
294
Search for available wireless access points.
• Confirm encryption key of the wireless access point if the network authentication is encrypted.
1 Select the wireless access point.
• To search for wireless access points again, press [DISP.].
• If no wireless access point is found, refer to “Connecting
by Manual Input” on P294.
2 (If network authentication is encrypted)
Enter the encryption key.
• For information on how to enter characters, refer to P64.
∫ Connecting by Manual Input
• Check the SSID, network authentication type, encryption type, and encryption key of the
wireless access point to be connected.
1 On the screen displayed in step 1 of “[From List]”, select [Manual Input].
2 Enter the SSID of the wireless access point you are connecting to, then select [Set].
• For information on how to enter characters, refer to P64.
3 Select the network authentication type.
4 (When an option other than [No Encryption] is selected)
Enter the encryption key.
[From List]
[WPA2-PSK]
Supported encryption methods: [TKIP], [AES]
[WPA2/WPA-PSK]
[No Encryption] —
• Check the wireless access points instruction manual and settings when saving a wireless
access point.
• If no connection can be established, the wireless access point’s radio waves may be too
weak.
Refer to “Message Display” (P325) and “Troubleshooting” (P328) for details.
• Depending on your environment, transmission speed between the camera and wireless
access point may decrease. In addition, the wireless access point may not be available for
use.