User Guide

4-2
Chapter 4: Web-based User Interface
4.1 Web-based user interface
The web-based user interface allows you to easily monitor the remote server’s hardware
information including temperatures, fan rotations, voltages, and power. This application also
lets you instantly power on/off or reset the remote server.
To enter the Web-based user interface:
1. Enter the BIOS Setup during POST.
2. Go to the Advanced Menu > Runtime Error Logging > CPU II0 Bridge
Configuration > Launch Storage OpROM, then press <Enter>.
3. Set Launch Storage OpROM to [Enabled].
4. Go to the Server Mgmt Menu > BMC network configuration > Configuration
Address source, then press <Enter>.
5. Enter the IP Address in BMC, Subnet Mask in BMC and Gateway Address in BMC.
6. Press <F10> to save your changes and exit the BIOS Setup.
You should install JRE on remote console rst before using web-based management.
You can nd
JRE
from the folder
JAVA
of the ASMB8-iKVM support CD. You can also
download JRE from
http://www.oracle.com/technetwork/java/javase/downloads/index.
html
4.1.1 Logging in the utility
1. Ensure that the LAN cable of the computer is connected to the LAN port of the remote
server.
2. Open the web browser and type in the same IP address as the one in the remote
server.
3. The below screen appears. Enter the default user name (admin) and password
(admin). Then click Login.