User Guide

2-2
Chapter 2: Hardware Information
2.2 Hardware installation
To install the server management board:
2.1 Before you proceed
Take note of the following precautions before you install the server management board to the
remote server system.
• Unplugtheserversystempowercordfromthewallsocketbeforetouching
any component.
• Useagroundedwriststraportouchasafelygroundedobjectortoametal
object,suchasthepowersupplycase,beforehandlingcomponentsto
avoid damaging them due to static electricity.
• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.
• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic
pad or in the bag that came with the component.
• Beforeyouinstallorremoveanycomponent,ensurethatthepowersupply
is switched off or the power cord is detached from the power supply. Failure
todosomaycauseseveredamagetothemotherboard,peripherals,and/or
components.
1. LocatetheBaseboardManagement
Cardheaderonthemotherboard.
2. OrientandpresstheManagementCard
in place.
The motherboard illustration is for reference only. The motherboard layout and appearance
mayvarydependingonthemodel,buttheinstallationstepsremainthesame.