User Guide

2-4
Chapter 2: Hardware Information
2.3 Firmware update and IP configuration
YouneedtoupdatetheASMB8-iKVMrmwareandcongureIPsourcebeforeyoustart
usingtheASMB8-iKVMboard.
2.3.1 Firmware update
Toupdatethermware:
1. InsertthesupportCDintotheopticaldrive.
2. Restarttheremoteserverthenpress<Del>duringPOSTtoentertheBIOSsetup.
3. GotoBootmenuandsettheBootDevicePriorityitemto[CD-ROM].
4. Whennished,press<F10>tosaveyourchangesandexittheBIOSsetup.
5. Onreboot,select
ASMB8-iKVM Firmware Update for Clear Configuration
from the
mainmenuandpress<Enter>toenterthesub-menu.
6. Fromtheconrmationmessage,select<Yes>toupdatethermware.
7. Waitforthermwareupdatingprocesstonish.
FreeDOS command prompt
Configure BMC IP Source Static IP for Shared LAN
Configure BMC IP Source DHCP IP for Shared LAN
Configure BMC IP Source Static IP for DM_LAN1
Configure BMC IP Source DHCP IP for DM_LAN1
ASMB8 Firnware Updated for Preserve Configuration (SDR, LAN, Username)
ASMB8 Firnware Updated for Clear Configuration (SDR, LAN, Username)
ASUS Server Z10PA-D8 Series System
WARNING !!!
UPDATE ASMB8 FIRMWARE NOW !
DO YOU WANT TO CONTINUE ?
No Yes
Youmayupdatethermwarefromtheweb-baseduserinterface.Refertothe
Firmware
Update
section for more information.