User Guide

ASUS ASMB8-iKVM
2-15
2.5.2 Configuring the user name and password
YoumaychangeyourusernameandpasswordfromtheASMC8utility.
To change the user name and password:
1. InsertthesupportCDintotheopticaldrive.
2. Restarttheremoteserverthenpress<Del>duringPOSTtoentertheBIOSsetup.
3. GotoBootmenuandsettheBootDevicePriorityitemto[CD-ROM].
4. Whennished,press<F10>tosaveyourchangesandexittheBIOSsetup.
5. Onreboot,select
FreeDOS command prompt
from the main menu then press
<Enter>.
6. From the
C:>
prompt,type
ASMC8 -user_name xxxxx
thenpress<Enter>to
change the user name.
7. Type
ASMC8 -user_password xxxxxxxx
,thenpress<Enter>tochangethe
password.
8. Restarttheremoteserver,entertheBIOSsetup,thenbootfromtheharddiskdrive.
c:\>ASMC8 -user_name super
Detect MotherBoard -> (Z10PA-D8 Series)
Detect KCS Interface
Change User Name to super
c:\>